Journal of Medical Physics
 Home | Search | Ahead of print | Current Issue | Archives | Instructions | Subscription | Login  The official journal of AMPI, IOMP and AFOMP      
 Users online: 32113  Home  EMail this page Print this page Decrease font size Default font size Increase font size 
Year : 1996  |  Volume : 21  |  Issue : 1  |  Page : 14-20

Target Dose Modification In Irradiation Techniques With More Than Two Radiation Beams



Correspondence Address:
P Geyer


Login to access the Email id

Source of Support: None, Conflict of Interest: None


Rights and PermissionsRights and Permissions

In some treatment protocols different parts of a target volume need to be irradiated with different doses. This can be achieved with a four-beam irradiation technique and dose rate modifying absorbers. The calculation of the transmission and thickness of the absorbers are based on the unmodified doses from single beam at a calculation point. Corrections are done by a modified graphic beam-zone method to consider the influence of the absorbers on scattered radiation. Phantom measurements show good agreement with the calculated values. The modification method is applicable without 3D planning systems but requires a small number of beams to limit the calculation and manufacture efforts.


[PDF]*
Print this article     Email this article
 Next article
 Previous article
 Table of Contents

 Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Citation Manager
 Access Statistics
 Reader Comments
 Email Alert *
 Add to My List *
 * Requires registration (Free)
 

 Article Access Statistics
    Viewed371    
    Printed29    
    Emailed0    
    PDF Downloaded52    
    Comments [Add]    

Recommend this journal